E-mail this page to a colleague

 

 

NAD 11TM  is a high density cement board reinforced with inorganic fibers.

 

[Bullet] Non-combustible
[Bullet] Dimensionally stabile
[Bullet] Chemically inert
[Bullet] Retains its mechanical strength at temperature
[Bullet] Easily machined to various shapes
[Bullet] Uniform temperature control
 
 

NAD 11TM can be used in many industries as platen insulation, as thermal insulation in ovens and furnaces, and as support pads in high temperature environment

NAD 11TM  is dimensionally stabile, non-combustible, chemically inert, and it retains its mechanical strength at temperature. It can be easily machined to various shapes.

 

A high density cement board reinforced with inorganic fibers.

 

 

36 x 48 in the following thicknesses in millimeters: 6,10,12,16,20,25,30,40,50,65,75; English equivalents are: 1/4 3/8, 1/2, 5/8, 3/4,1 3/16, 1 ½, 2, 2 3/8, 3; cut and fabricated to shape.

Neutral gray

 

Density

 109 lbs/ft3 - 1750 kg/m3

Maximum operating temperature

 932° F (500° C)

Shrinkage, during initial heating condition

  

    660° F (350° C)

 .21%

    660° F (350° C)

 .25%

Compressive strength 

 17,110 psi (118MN/m2)

Dielectric strength

 69V/mil (2.9KV/mm)

Water absorption

 15%
Thermal Conductivity 73 BTU-in/ft2,hr,° F@122° F (0.25W/mK@50° C)
2.15 BTU-in/ft2,hr,° F@752° F (0.31W/mK@400° C)
Arc resistance 370 sec
Volume resistivity 1.00 x 104 Mohm/cm (2.54 x 104 Mohm/in)
E-mail this page to a colleague