E-mail this page to a colleague

 

J-Therm 1401 Millboard® is a monolithic board made of ceramic fibers, clay, inert fillers and a small amount of organic binders used as a backup thermal insulation or parting media

 

 

[Bullet] Excellent dimensional & temperature stability
[Bullet] Thermal shock resistance
[Bullet] Low thermal conductivity and heat storage
[Bullet] Good compression resistance & dielectric strength
[Bullet] Unaffected by oil or water
[Bullet] Excellent resistance to chemical attack (except for hydrofouric acid, 
     phosphoric  acid and strong alkalies)
 
 

J-Therm 1401 Millboard can be used in high and low temperature gaskets, as backup insulation, heat and flame shields, wood stove thermal barriers, duct insulation, low and high temperature dryers, parting media, and expansion joint material.

 

A monolithic board made of ceramic fibers, clay, inert fillers, and a small amount of organic binders.

 

 

55 x 55 in the following thicknesses in inches - 1/16, 1/8, 3/16, ¼, and ½; cut and fabricated to shape by Taylored Industries.

Off-white

 

 
Density 30-35 lbs/ft3

Maximum operating temperature

2300° F (1260° C)

 Tensile strength

  

  machine direction

750 lbs/in2

  cross direction

250 lbs/in2

Thermal Conductivity

  

  @ 500° F

.64 BTU-in/hr/ft2/° F

  @ 800° F

.78 BTU-in/hr/ft2/° F

  @ 1300° F

1.03 BTU-in/hr/ft2/° F

  @ 1600° F

 1.31 BTU-in/hr/ft2/° F

Dielectric strength

50 volts/mil

J-Therm 1401 Millboard®  is manufactured by J-Therm Inc

E-mail this page to a colleague